| - 15“ high-resolution color LCD to display patient’s ECG waveform, respiratory waveform and SpO2 cubage waveform;
- Abundant and friendly display interface, multifold ECG display screen:
- Main monitoring screen: displays the information of all the waveforms and parameters visually.
- Observing screen: heart rate value and SpO2 value display in big fonts.
- Seven lead waveforms on one screen: displays the information of 7 ECG lead waveforms and different monitoring parameters on one screen.
- Eight channel real-time waveforms and two hours’ trends viewing: intuitionistic knowing the physiological status of patient.
- Battery power indicator, which enables real-time battery power detection and displays the battery power.
- Intuitionistic and easy calculation. Medical consistent calculation and analysis can accurately figure out the speed of medicine supply and dose, to observe the relation between amount and effect indirectly.
- Convenient and applied accessorial hemostatic function, according to patient’s condition, different hemostatic cuff pressure can be set.
- Automatic analysis of 20 arrhythmia waveforms and VPC, waveform freezing function and automatic ST segment measurement and manual analysis;
- “8/24/120 hours” trend analysis function, under working status, up to 120 hours statistic data of ECG, TEMP, SpO2, RESP, IBP and NIBP etc. trends;
- 100 groups of arrhythmia cases’ data and the corresponding ECG, TEMP, SpO2, RESP and pulse value of each case;
- Storage and recall of a list of 500 groups of NIBP measurement data, as well as heart rate, body temperature, respiratory rate and SpO2/pulse rate when the measure of blood pressure is taken;
- 8-hour permanent ECG data recall (depending on system capacity);
- Unique file management, which enables recording, modifying, deleting and saving operation of patient’s information;
- Displays heart rate trend, SpO2 trend, respiration trend or waveform simultaneously on oxyCRG, to know the instantaneous condition change of neonate;
- High precision NIBP measuring module, good repeat capability;
- Software and hardware-dual excess air pressure protection function;
- Special SpO2 measuring device, which ensures the accuracy of SpO2 and pulse rate measures;
- Multiple interface monitoring, which enables simultaneous monitoring of several ECG waveforms;
- Precise alarm system, different alarm events adopt different alarm degrees; 3 degrees visual and audible alarm function;
- Flexible high and low alarm limits setting function;
- Easy to Color-code and change the color of the font, background and waveforms if needed;
- Cardiac pacemaker restraining function enables to be used along with cardiac pacemaker;
- Resistance against defibrillator and electrosurgical knife interference;
- Blood pressure may be measured in the mode of “adult/infant/neonate”, which may be selected via the menu, to better suit the adult, infant and neonatal patient;
- Built-in printer (optional) to output waveforms and text;
- Networking with the central station as a part of the central network;
- IBP and CO2 etc. parameters are optional.
|